**Please Note: The DSE6110-06 has been discontinued and is no longer available. If ordered, the recommended replacement DSE6110-05 will be shipped. The DSE6110 MKIII is an Auto Start Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The module includes USB connection and dedicated DSENet® terminals for system expansion. The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements. The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC ? functionality. The modules can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available. OVERALL SIZE 216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”) PANEL CUTOUT SIZE 184 mm x 137 mm (7.2” x 5.3”) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.5kg PRODUCT VARIANTS 6110-05 – 6110 MKIII Auto Start Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 260 mA at 12 V, 150 mA at 24 V MAXIMUM STANDBY CURRENT 145 mA at 12 V, 85 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE  RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICKUP

VOLTAGE  RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

INPUTS

DIGITAL INPUTS A to H Negative switching ANALOGUE INPUTS A & D Configurable as: Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor ANALOGUE INPUTS B & C Configurable as: Negative switching digital input Resistive sensor

OUTPUTS

OUTPUT A & B (FUEL & START) 10 A DC at supply voltage AUXILIARY OUTPUTS C, D, E,  F, G & H 2 A DC at supply voltage  

The DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements. The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. The modules can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available. OVERALL SIZE 216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”) PANEL CUTOUT SIZE 184 mm x 137 mm (7.2” x 5.3”) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.5kg PRODUCT VARIANTS 6120-05 - 6120 MKIII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 260 mA at 12 V, 150 mA at 24 V MAXIMUM STANDBY CURRENT 145 mA at 12 V, 85 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE  RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICKUP

VOLTAGE  RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

INPUTS

DIGITAL INPUTS A to H Negative switching ANALOGUE INPUTS A & D Configurable as: Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor ANALOGUE INPUTS B & C Configurable as: Negative switching digital input Resistive sensor

OUTPUTS

OUTPUT A & B (FUEL & START) 10 A DC at supply voltage AUXILIARY OUTPUTS C, D, E,  F, G & H 2 A DC at supply voltage ­  

**Please Note: The DSE6120-35 has been discontinued and is no longer available. If ordered, the recommended replacement DSE6120-05 will be shipped. The DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements. The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. The modules can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available. OVERALL SIZE 216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”) PANEL CUTOUT SIZE 184 mm x 137 mm (7.2” x 5.3”) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.5kg PRODUCT VARIANTS 6120-05 - 6120 MKIII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 260 mA at 12 V, 150 mA at 24 V MAXIMUM STANDBY CURRENT 145 mA at 12 V, 85 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE  RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICKUP

VOLTAGE  RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

INPUTS

DIGITAL INPUTS A to H Negative switching ANALOGUE INPUTS A & D Configurable as: Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor ANALOGUE INPUTS B & C Configurable as: Negative switching digital input Resistive sensor

OUTPUTS

OUTPUT A & B (FUEL & START) 10 A DC at supply voltage AUXILIARY OUTPUTS C, D, E,  F, G & H 2 A DC at supply voltage ­  

**Please Note: The DSE6120-04 has been discontinued and is no longer available. If ordered, the recommended replacement DSE6120-05 will be shipped. The DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements. The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. The modules can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available. OVERALL SIZE 216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”) PANEL CUTOUT SIZE 184 mm x 137 mm (7.2” x 5.3”) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.5kg PRODUCT VARIANTS 6120-05 - 6120 MKIII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 260 mA at 12 V, 150 mA at 24 V MAXIMUM STANDBY CURRENT 145 mA at 12 V, 85 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE  RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICKUP

VOLTAGE  RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

INPUTS

DIGITAL INPUTS A to H Negative switching ANALOGUE INPUTS A & D Configurable as: Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor ANALOGUE INPUTS B & C Configurable as: Negative switching digital input Resistive sensor

OUTPUTS

OUTPUT A & B (FUEL & START) 10 A DC at supply voltage AUXILIARY OUTPUTS C, D, E,  F, G & H 2 A DC at supply voltage ­  

**Please Note: The DSE701-05 has been discontinued and is no longer available. If ordered, the recommended replacement DSE3110-01 will be shipped. The DSE701 MKII is a compact control module that offers a range of features for single-set applications. The controller can be used in manual or auto start mode. OVERALL SIZE 72 mm x 72 mm x 38 mm (2.8” x 2.8” x 1.5”) Excludes Key Switch PANEL CUTOUT SIZE 68 mm x 68 mm (2.7 ” x 2.7″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.14kg PRODUCT VARIANTS 0701-05 – 701MKII Manual & Auto Start Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without internal batteries. MAXIMUN OPERATING CURRENT 26 mA at 12 V, 27 mA at 24 V MAXIMUM STANDBY CURRENT 20 mA at 12 V, 21 mA at 24 V CHARGE/FAIL EXITATION RANGE 0 V TO 35 V

OUTPUTS

START Solid state 1.2 A negative grounding terminal RUN Solid state 1.2 A negative grounding terminal PRE-HEAT Solid state 1.2 A negative grounding terminal

GENERATOR

VOLTAGE RANGE 15 V – 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz

**Please Note: The DSE702-00 has been discontinued and is no longer available.  If ordered, the recommended replacement DSE3110-01 will be shipped. The DSE702 is a compact control module with an hours counter display. The module offers a range of features for single-set applications including low oil pressure, high engine temperature and over speed monitoring. The controller provides the option of manual or auto start control for the user (must specify type at time of ordering) OVERALL SIZE 84 mm x 72 mm x 34.9 mm (3.3″ x 2.8″ x 1.4″) PANEL CUT-OUT SIZE 80 mm x 68 mm (3.1″ x 2.7′”) MAXIMUM PANEL THICKNESS 8 mm (0.3″) WEIGHT 0.16kg PRODUCT VARIANTS 0702-00 – 702 Auto Start Control Module (Hours Counter, DSE Logo) 0702-10 – 702 Manual Start Control Module (Hours Counter, DSE Logo)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries

OUTPUTS

CRANK Solid state 1.2 A negative grounding terminal FUEL Solid state 1.2 A negative grounding terminal PRE-HEAT Solid state 1.2 A negative grounding terminal

GENERATOR

VOLTAGE RANGE 15 V – 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz  

**Please Note: The DSE702-10 has been discontinued and is no longer available.  If ordered, the recommended replacement DSE3110-01 will be shipped. The DSE702 is a compact control module with an hours counter display. The module offers a range of features for single-set applications including low oil pressure, high engine temperature and over speed monitoring. The controller provides the option of manual or auto start control for the user (must specify type at time of ordering) OVERALL SIZE 84 mm x 72 mm x 34.9 mm (3.3″ x 2.8″ x 1.4″) PANEL CUT-OUT SIZE 80 mm x 68 mm (3.1″ x 2.7′”) MAXIMUM PANEL THICKNESS 8 mm (0.3″) WEIGHT 0.16kg PRODUCT VARIANTS 0702-00 – 702 Auto Start Control Module (Hours Counter, DSE Logo) 0702-10 – 702 Manual Start Control Module (Hours Counter, DSE Logo)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries

OUTPUTS

CRANK Solid state 1.2 A negative grounding terminal FUEL Solid state 1.2 A negative grounding terminal PRE-HEAT Solid state 1.2 A negative grounding terminal

GENERATOR

VOLTAGE RANGE 15 V – 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz  

The DSE7110 MKII is an Auto Start Control Module with an icon-based display. The control module has been designed to control single diesel or gas gen-set applications. OVERALL SIZE 240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.82kg PRODUCT VARIANTS 7110-01 – 7110 MKII Auto Start Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 290 mA at 12 V, 140 mA at 24 V MAXIMUM STANDBY CURRENT 75 mA at 12 V, 40 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 10 A short term, 5 A continuous, at supply voltage OUTPUT B (START) 10 A short term, 5 A continuous, at supply voltage OUTPUTS C & D 8 A AC at ­­­250 V AC (Volt-free) AUXILIARY OUTPUTS E, F, G & H 2 A DC at supply voltage

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7110 MKII is an Auto Start Control Module with an icon-based display. The control module has been designed to control single diesel or gas gen-set applications. OVERALL SIZE 240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.82kg PRODUCT VARIANTS 7110-01 – 7110 MKII Auto Start Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 290 mA at 12 V, 140 mA at 24 V MAXIMUM STANDBY CURRENT 75 mA at 12 V, 40 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 10 A short term, 5 A continuous, at supply voltage OUTPUT B (START) 10 A short term, 5 A continuous, at supply voltage OUTPUTS C & D 8 A AC at ­­­250 V AC (Volt-free) AUXILIARY OUTPUTS E, F, G & H 2 A DC at supply voltage

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7110 MKII is an Auto Start Control Module with an icon-based display. The control module has been designed to control single diesel or gas gen-set applications. OVERALL SIZE 240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.82kg PRODUCT VARIANTS 7110-01 – 7110 MKII Auto Start Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 290 mA at 12 V, 140 mA at 24 V MAXIMUM STANDBY CURRENT 75 mA at 12 V, 40 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 10 A short term, 5 A continuous, at supply voltage OUTPUT B (START) 10 A short term, 5 A continuous, at supply voltage OUTPUTS C & D 8 A AC at ­­­250 V AC (Volt-free) AUXILIARY OUTPUTS E, F, G & H 2 A DC at supply voltage

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

**Please Note: The DSE7120-01 has been discontinued and is no longer available. If ordered, the recommended replacement DSE7320-33 will be shipped. The DSE7110 MKll Auto Start Control Module and the DSE7120 MKll Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications.

DIMENSIONS

OVERALL 240 mm x 181 mm x 42 mm (9.4” x 7.1” x 1.6”)

PANEL CUT-OUT

220 mm x 160 mm (8.7” x 6.3”)

MAXIMUM PANEL THICKNESS

8 mm (0.3”)

DC SUPPLY CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

290 mA at 12 V, 140 mA at 24 V

MAXIMUM STANDBY CURRENT

75 mA at 12 V, 40 mA at 24 V

CHARGE FAIL/EXCITATION RANGE

0 V to 35 V

GENERATOR & MAINS (UTILITY) VOLTAGE RANGE

15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAGNETIC PICKUP VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

10,000 Hz (max)

INPUTS DIGITAL INPUTS A TO F

Negative switching

ANALOGUE INPUTS A TO C

Configurable as: Negative switching digital input 0 Ω to 480 Ω

ANALOGUE INPUT D

Configurable as: Negative switching digital input 0 V to 10 V 4 mA to 20 mA 0 Ω to 480 Ω

OUTPUTS OUTPUT A & B (FUEL & START)

10 A short term, 5 A continuous, at supply voltage

OUTPUTS C & D

8 A AC at 250 V AC (Volt-free)

AUXILIARY OUTPUTS E, F, G & H

2 A DC at supply voltage  

The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED’s, remote PC’s and via SMS text alerts (with external communication device). OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) PRODUCT VARIANTS 7310-03 – 7310 MKII Autostart Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V  

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz  

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

**Please Note: The DSE7310-33 has been discontinued and is no longer available.  If ordered, the recommended replacement DSE7310-03 or DSE7320-03 will be shipped. The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED’s, remote PC’s and via SMS text alerts (with external communication device). OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) PRODUCT VARIANTS 7310-03 – 7310 MKII Autostart Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED’s, remote PC’s and via SMS text alerts (with external communication device). OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) PRODUCT VARIANTS 7310-03 – 7310 MKII Autostart Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7320 MKII is a powerful, new generation Auto Mains (Utility) Failure genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED's, remote PC's and via SMS text alerts (with external communication device). OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6" x 7.2" x 2.0") PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3") PRODUCT VARIANTS 7320-03 - 7320 MKII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7320 MKII is a powerful, new generation Auto Mains (Utility) Failure genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED's, remote PC's and via SMS text alerts (with external communication device). OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6" x 7.2" x 2.0") PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3") PRODUCT VARIANTS 7320-03 - 7320 MKII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

**Please Note: The DSE7320-34 has been discontinued and is no longer available. If ordered, the recommended replacement DSE7320-03 or DSE7320-33 will be shipped. The DSE7320 MKII is a powerful, new generation Auto Mains (Utility) Failure genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED's, remote PC's and via SMS text alerts (with external communication device). OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6" x 7.2" x 2.0") PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3") PRODUCT VARIANTS 7320-03 - 7320 MKII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7410 MKII is an intelligent, powerful auto start control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.88kg PRODUCT VARIANTS 7410-03 – 7410 MKII Auto Start Control Module 7410-04 – 7410 MKII Auto Start Control Module (Htr)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 Minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS

DIGITAL INPUTS A-H Negative Switching ANALOGUE INPUTS A,B, E & F Configurable as Negative Switching Digital Input 0 V to 10 V Sensor 4mA to 20mA Sensor Resistive Sensor ANALOGUE INPUTS C & D Negative Switching Digital Input Resistive Sensor OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE 15 V to 415 V AC (Ph-N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7410 MKII is an intelligent, powerful auto start control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.88kg PRODUCT VARIANTS 7410-03 – 7410 MKII Auto Start Control Module 7410-04 – 7410 MKII Auto Start Control Module (Htr)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 Minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS

DIGITAL INPUTS A-H Negative Switching ANALOGUE INPUTS A,B, E & F Configurable as Negative Switching Digital Input 0 V to 10 V Sensor 4mA to 20mA Sensor Resistive Sensor ANALOGUE INPUTS C & D Negative Switching Digital Input Resistive Sensor OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE 15 V to 415 V AC (Ph-N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

**Please Note: The DSE7410-34 (Heated Display) has been discontinued and is No Longer Available.  If ordered, you will receive the DSE7410-33 (Same Module, just not heated display). The DSE7410 MKII is an intelligent, powerful auto start control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.88kg PRODUCT VARIANTS 7410-03 – 7410 MKII Auto Start Control Module 7410-04 – 7410 MKII Auto Start Control Module (Htr)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 Minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS

DIGITAL INPUTS A-H Negative Switching ANALOGUE INPUTS A,B, E & F Configurable as Negative Switching Digital Input 0 V to 10 V Sensor 4mA to 20mA Sensor Resistive Sensor ANALOGUE INPUTS C & D Negative Switching Digital Input Resistive Sensor OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE 15 V to 415 V AC (Ph-N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7420 MKII is an intelligent, powerful auto mains (utility) failure control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.88kg PRODUCT VARIANTS 7420-03 - 7420 MKII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 Minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS

DIGITAL INPUTS A-H Negative Switching ANALOGUE INPUTS A,B, E & F Configurable as Negative Switching Digital Input 0 V to 10 V Sensor 4mA to 20mA Sensor Resistive Sensor ANALOGUE INPUTS C & D Negative Switching Digital Input Resistive Sensor OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & MAINS

VOLTAGE RANGE 15 V to 415 V AC (Ph-N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE7420 MKII is an intelligent, powerful auto mains (utility) failure control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.88kg PRODUCT VARIANTS 7420-03 - 7420 MKII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 Minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS

DIGITAL INPUTS A-H Negative Switching ANALOGUE INPUTS A,B, E & F Configurable as Negative Switching Digital Input 0 V to 10 V Sensor 4mA to 20mA Sensor Resistive Sensor ANALOGUE INPUTS C & D Negative Switching Digital Input Resistive Sensor OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & MAINS

VOLTAGE RANGE 15 V to 415 V AC (Ph-N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

**Please Note: The DSE7420-34 has been discontinued and is no longer available. If ordered, the recommended replacement DSE7420-03 or DSE7420-33 will be shipped. The DSE7420 MKII is an intelligent, powerful auto mains (utility) failure control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.88kg PRODUCT VARIANTS 7420-03 - 7420 MKII Auto Mains (Utility) Failure Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for up to 1 Minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS

DIGITAL INPUTS A-H Negative Switching ANALOGUE INPUTS A,B, E & F Configurable as Negative Switching Digital Input 0 V to 10 V Sensor 4mA to 20mA Sensor Resistive Sensor ANALOGUE INPUTS C & D Negative Switching Digital Input Resistive Sensor OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & MAINS

VOLTAGE RANGE 15 V to 415 V AC (Ph-N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)  

The DSE 7450 is a control module designed to control DC/Hybrid generators in supplying both a load and/or the charging of batteries.

Specific attention has been given to ensure this module has the necessary features to be configured for many different and challenging applications. Owing to the large number of monitoring points and the built in programmable logic controller, a wide number of operating modes can be realised. This provides the user with the ultimate flexibility in the engine control of the generator to ensure battery life optimisation, reduce engine maintenance/replacement and fuel usage. OVERALL SIZE 240 mm x 172 mm x 57 mm (9.4” x 6.8” x 2.2”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7" x 6.3") MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.92kg PRODUCT VARIANTS 7450-02 - 7450 DC/Hybrid Generator Control Module

DC SUPPLY

The DSE8003 is a full colour 7” graphical remote overview display. It has been designed to seamlessly integrate with 86xx MKII load share control modules. The MKII version offers an improved graphical user interface and faster operating response times compared to its MKI predecessor. Using a RS485 link a single overview display can be connected to multiple control modules over a maximum distance of 1.2km. OVERALL SIZE 310 mm x 160 mm x 40 mm (12.2” x 6.3” x 1.5”) PANEL CUTOUT SIZE 282 mm x 136 mm (11.1″ x 5.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 1.0kg PRODUCT VARIANTS 8003-02 – 8003 7″ Graphical Colour Multi-Set Remote Overview Display

DC SUPPLY

The DSE815 provides an interface between the AVR and a PC, using an RS485 connection allowing access to the AVR settings via the DSE Configuration Suite PC Software. DIMENSIONS 90 mm x 50 mm x 25 mm 3.5″ x 2″ x 1″ DC SUPPLY Powered from the USB connection OPERATING TEMPERATURE RANGE -30 ºC to +70 ºC -22 °F to +158 °F  

The DSE855 communications device allows monitoring of a single DSE controller with USB connectivity over a LAN or WAN connection. To achieve this the DSE855 utilises its in-built web server or MODBUS TCP. In order to use over a LAN connection the on-site router must be configured to be accessible from any global location. Works with: Auto Start: DSEL401MKII/DSE4310/DSE4410/DSE4510/DSE4610/DSE6010 MKII/DSE6110/DSE6610/DSE7110 MKII/DSE7210/DSE7310 Auto Mains (Utility) Failure: DSE4320/DSE4420/DSE4520/DSE4620/DSE6020/DSE6120 MKII/DSE6620/DSE7120MKII/DSE7220/DSE7320 OVERALL SIZE 35 mm x 97 mm x 102 mm (1.4” x 3.8” x 4.0”) WEIGHT 0.16kg PRODUCT VARIANTS 0855-01 – 855 USB to Ethernet Communications Device

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 123 mA at 12 V 71 mA at 24 V MAXIMUM STANDBY CURRENT 104 mA at 12 V 63 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) Ethernet  

The DSE857 communications device allows monitoring of a single DSE controller with USB connectivity by converting it to an RS485 connection. To achieve this the DSE857 connects to an RS485 MODBUS RTU master over 1.2km away. The MODBUS RTU master can be an external PLC, Building Management System (BMS) or a Windows PC running the DSE Configuration Suite Software. Works with Auto Start: DSEL401MKII/DSE4310/DSE4410/DSE4510/DSE4610/DSE6010 MKII/DSE6110/DSE6610/DSE7110 MKII/DSE7210/DSE7310 Auto Mains (Utility) Failure: DSE4320/DSE4420/DSE4520/DSE4620/DSE6020/DSE6120 MKII/DSE6620/DSE7120MKII/DSE7220/DSE7320 OVERALL SIZE 35 mm x 97 mm x 102 mm (1.4” x 3.8” x 4.0”) WEIGHT 0.16kg PRODUCT VARIANTS 0857-01 – 857 USB to RS485 Communications Device MAXIMUM OPERATING CURRENT 123 mA at 12 V 71 mA at 24 V MAXIMUM STANDBY CURRENT 104 mA at 12 V 63 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) RS485  

The DSE8610 MKII represents the latest in complex load sharing & synchronising control technology. Designed to handle the most complex grid type generator applications the DSE8610 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. New Features Added May 2020. Read Product Change Notification Document for details. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) WEIGHT 0.88kg PRODUCT VARIANTS 8610-02 – 8610 MKII Synchronising & Load Sharing Control Module (Ct, Rtc)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 460 mA at 12 V, 245 mA at 24 V MAXIMUM STANDBY CURRENT 375 mA at 12 V, 200 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & BUS

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

BUILT-IN GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated

BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated  

The DSE8610 MKII represents the latest in complex load sharing & synchronising control technology. Designed to handle the most complex grid type generator applications the DSE8610 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. New Features Added May 2020. Read Product Change Notification Document for details. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) WEIGHT 0.88kg PRODUCT VARIANTS 8610-02 – 8610 MKII Synchronising & Load Sharing Control Module (Ct, Rtc)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 460 mA at 12 V, 245 mA at 24 V MAXIMUM STANDBY CURRENT 375 mA at 12 V, 200 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & BUS

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

BUILT-IN GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated

BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated  

The DSE8610 MKII represents the latest in complex load sharing & synchronising control technology. Designed to handle the most complex grid type generator applications the DSE8610 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. New Features Added May 2020. Read Product Change Notification Document for details. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) WEIGHT 0.88kg PRODUCT VARIANTS 8610-02 – 8610 MKII Synchronising & Load Sharing Control Module (Ct, Rtc)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 460 mA at 12 V, 245 mA at 24 V MAXIMUM STANDBY CURRENT 375 mA at 12 V, 200 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & BUS

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 25 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

BUILT-IN GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated

BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated  

The DSE8620 MKII represents the latest in complex load sharing & synchronising control technology. Designed to synchronise a single genset with a mains (utility) supply, the DSE8620 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. The controller also has the option to be configured for use as a DSE8610 MKII Auto Start Load Sharing & Synchronising Control Module. When converted for use as a DSE8610 MKII the unit provides generator to generator load share functionality. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) WEIGHT 0.88kg PRODUCT VARIANTS 8620-02 – 8620 MKII Synchronising Auto Mains (Utility) Failure Load Sharing Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 5 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 530 mA at 12 V, 280 mA at 24 V MAXIMUM STANDBY CURRENT 320 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E to L 2 A DC at supply voltage

GENERATOR & BUS

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

BUILT-IN GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE 500Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE 0 V to 10 V DC Fully isolated

BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE 500Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated  

The DSE8660 MKII is the latest and most advanced Auto Transfer Switch & Mains (Utility) Control Module within the DSE synchronising and load sharing control module range. Developed alongside the DSE8610 MKII this control module provides industry-leading features and benefits for the most complex grid type generator installations. OVERALL SIZE 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) WEIGHT 0.88kg PRODUCT VARIANTS 8660-02 – 8660 MKII Auto Transfer Switch & Mains (Utility) Control Module (Ct, Rtc)

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 460 mA at 12 V, 245 mA at 24 V MAXIMUM STANDBY CURRENT 375 mA at 12 V, 200 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS

OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage

GENERATOR & BUS

VOLTAGE RANGE 15 V to 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max) MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated

BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated  

The DSE8680 is an intelligent control module designed to control a generator bus-tie breaker. The control module features technology that automatically manages the synchronising and check-sync across the breaker using the DSE multi-set communications (MSC) link when opening and closing the bus-tie breaker. OVERALL SIZE 240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”) PANEL CUTOUT SIZE 220 mm x 160 mm (8.7″ x 6.3″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3”) WEIGHT 0.86kg PRODUCT VARIANTS 8680-01 – 8680 Synchronising Generator Bus Tie Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous MAXIMUM OPERATING CURRENT 150 mA at 12 V, 80 mA at 24 V MAXIMUM STANDBY CURRENT 50 mA at 12 V, 30 mA at 24 V

BUS 1 AND BUS 2

VOLTAGE RANGE 15 V to 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz

OUTPUTS

OUTPUTS C & D 8 A at 250 V AC (Volt free) AUXILIARY OUTPUTS E,F,G,H,I & J 2 A DC at supply voltage  

The DSE890 MKII is an Ethernet/4G gateway device that enables compatible DSE controllers to be monitored remotely via DSEWebNet® REQUIRES – Combined 4G LTE (Main & Diversity) and GPS Antenna – 020-1053 if 4G Signal is Needed. Unit also fully compatible with 2G & 3G. The DSE890 MKII connects to the control module (s) to be monitored. It is then connected to a network and assigned an IP address. Once an IP address is assigned, the user can add a new site location to their DSEWebNet® account and begin monitoring remotely via any Internet connection or by using the mobile app. OVERALL SIZE 85 mm x 149 mm x 51 mm (3.4” x 5.9” x 2.0”) WEIGHT 0.23kg PRODUCT VARIANTS 0890-04 – 890 DSEWebnet® Gateway – 4G GSM/Ethernet

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 36 V continuous CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 8 V before dropout and supply recovers to 8 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT GSM                      755 mA at 12 V 376 mA at 24 V GSM & GPS          755 mA at 12 V 376 mA at 24 V MAXIMUM STANDBY CURRENT GSM                      207 mA at 12 V 113 mA at 24 V GSM & GPS          207 mA at 12 V 113 mA at 24 V

**Please Note: The DSE891-01 has been discontinued and is no longer available. If ordered, the recommended replacement DSE890-04 will be shipped. The Gateway DSE891 connects to the DSE data server by an integral Ethernet connection only. This is most suited for fixed installations where an ADSL / DSL cable broadband service is available (external broadband modem required, not supplied by DSE). OVERALL SIZE 85 mm x 149 mm x 51 mm (3.4” x 5.9” x 2.0”) WEIGHT 0.25kg PRODUCT VARIANTS 0891-01 – 891 DSEWebnet Gateway – Ethernet

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT Ethernet                 200 mA at 12 V 110 mA at 24 V MAXIMUM STANDBY CURRENT Ethernet                150 mA at 12 V 90 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) RS232 (Single DSE Controller) RS485 (Multiple DSE Controllers) Ethernet (Multiple DSE Controllers)  

The DSE892 connects DSE control modules to external SNMP systems. Once a connection is made full monitoring and control functionality becomes active. The gateway device specialises in monitoring the instrumentation and operating state of the connected DSE control module. OVERALL SIZE 85 mm x 149 mm x 51 mm (3.3” x 5.8” x 2.0”) WEIGHT 0.24kg PRODUCT VARIANTS 0892-01 – 892 Simple Management Network Protocol (SMNP) Gateway

DC SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 8 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 200 mA at 12 V 110 mA at 24 V MAXIMUM STANDBY CURRENT 150 mA at 12 V 90 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller) RS232 (Single DSE Controller) RS485 (Multiple DSE Controllers) Ethernet (Multiple DSE Controllers) Ethernet SNMP & SMTP  

**Please Note: The DSE8920 has been discontinued.  There is no direct replacement for this product. An alternative option is available if you still require a 7” colour screen option. To continue to have a 7” colour screen option on your load sharing applications you need to order a DSE8620-02 Synchronising Auto Mains Failure Load Share Control Module. This product can be configured for use as a DSE8610-02 Auto Start Load Share Control Module. You will also require a DSE8003-02 7” Colour Remote Overview Display. Both products must be used together The DSE8920 7″ Colour Load Sharing & Synchronising Control Module has been designed to parallel single generators with a mains (utility) supply. The module offers the added flexibility of being configurable to function as a DSE8910 Auto Start Load Share Control Module for paralleling up to 32 generators with multiple mains (utility) supplies. Key features of the module include a full colour 7″ optically bonded display, 800 x 480-pixel graphical user interface, built-in AVR, governor and CAN control, two types of KW/VAr sharing support and drag & drop advanced PLC editor. OVERALL SIZE 310 mm x 162 mm x 51 mm (12.2″ x 6.4″ x 2.0″) PANEL CUTOUT SIZE 282 mm x 136 mm (11.1″ x 5.4″) MAXIMUM PANEL THICKNESS 8.0 mm (0.3″) WEIGHT 1.0 kg PRODUCT VARIANTS 8920-01 – 8910 7″ Colour Load Share & Synchronising Control Module

DC SUPPLY

CONTINUOUS VOLTAGE RATING 5 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 1.2 A at 12 V 0.6 A at 24 V MAXIMUM STANDBY CURRENT 0.7 A at 12 V, 0.35 A at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

INPUTS & OUTPUTS

DIGITAL INPUTS A TO L Negative Switching ANALOGUE INPUTS A TO D Configurable as: Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor 0 Ω to 480 Ω sensor OUTPUTS A & B (FUEL & START) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (volt-free) AUXILIARY OUTPUTS E TO L 2 A DC at supply voltage

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

BUILT-IN AVR GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE 500 Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE 0 V to 10 V DC Fully isolated  

**Please Note: The DSE9130 has been discontinued. If ordered, you may receive the DSE9130 until stock is depleted or the DSE BC1205 will be the direct replacement** The DSE9130 12 volt 5 amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overload condition LED indicator on the front to assist with status identification, operates during cranking and running and accepts multiple AC voltage connections. OVERALL SIZE 136 mm x 140 mm x 63 mm (5.4” x 5.5” x 2.5”) WEIGHT 0.5kg PRODUCT VARIANTS 9130-00 – 12 volt 5 amp Compact Battery Charger (90v-305v 50/60Hz)

AC SUPPLY

VOLTAGE RANGE 90 V to 250 V (L-N) DC OUTPUT 5 A DC 12 V DC at 13.7 V DC

RIPPLE AND NOISE

<1%

EFFICIENCY

>80%

REGULATION

LINE <0.001% Vo LOAD 1% Vo

PROTECTIONS

Short Circuit Over Voltage Over Current Reverse Polarity  

The DSE9150 12 volt 3 amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overload condition LED indicator on the front to assist with status identification, operates during cranking and running and accepts multiple AC voltage connections. OVERALL SIZE 108 mm x 101 mm x 49 mm (4.2” x 4.0” x 1.9”) WEIGHT 0.16kg PRODUCT VARIANTS 9150-00 - 12 volt 3 amp Compact Battery Charger (90v-265v 50/60Hz)

AC SUPPLY

VOLTAGE RANGE 90 V to 250 V (L-N) DC OUTPUT 5 A DC 12 V DC at 13.7 V DC

RIPPLE AND NOISE

<1%

EFFICIENCY

>80%

REGULATION

LINE <0.001% Vo LOAD 1% Vo

PROTECTIONS

Short Circuit Over Voltage Over Current Reverse Polarity