Deep Sea Electronics DSE7120 MKII Auto Mains (Utility) Failure Control Module

**Please Note: The DSE7120-01 has been discontinued and is no longer available. If ordered, the recommended replacement DSE7320-33 will be shipped.

The DSE7110 MKll Auto Start Control Module and the DSE7120 MKll Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications.

DIMENSIONS

OVERALL
240 mm x 181 mm x 42 mm (9.4” x 7.1” x 1.6”)

PANEL CUT-OUT

220 mm x 160 mm (8.7” x 6.3”)

MAXIMUM PANEL THICKNESS

8 mm (0.3”)

DC SUPPLY
CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

290 mA at 12 V, 140 mA at 24 V

MAXIMUM STANDBY CURRENT

75 mA at 12 V, 40 mA at 24 V

CHARGE FAIL/EXCITATION RANGE

0 V to 35 V

GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE

15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAGNETIC PICKUP
VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

10,000 Hz (max)

INPUTS
DIGITAL INPUTS A TO F

Negative switching

ANALOGUE INPUTS A TO C

Configurable as: Negative switching digital input
0 Ω to 480 Ω

ANALOGUE INPUT D

Configurable as: Negative switching digital input
0 V to 10 V
4 mA to 20 mA
0 Ω to 480 Ω

OUTPUTS
OUTPUT A & B (FUEL & START)

10 A short term, 5 A continuous, at supply voltage

OUTPUTS C & D

8 A AC at 250 V AC (Volt-free)

AUXILIARY OUTPUTS E, F, G & H

2 A DC at supply voltage