AIMS Power 4000 Watt Pure Sine Inverter Charger 12 VDC 120/240 VAC 50/60Hz PICOGLF4012120240VS
$1,745.00 Original price was: $1,745.00.$1,657.75Current price is: $1,657.75.
4000 Watt Pure Sine Inverter Charger 12Vdc / 120Vac Input & 120/240Vac Split Phase Output
This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment.
During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing.
Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant.
- 4000 watt low frequency inverter
- 12,000 watt surge for 20 seconds 300% surge capability
- 120/240 VAC output Split Phase Charges with 120 Vac multi-stage smart charger
- 115 Amp battery priority selector
- Charges lithium LiFePO4, gel, AGM and lead batteries. We recommend checking battery charging specifications for all batteries.
- Direct connect AC terminal block
- Marine coated and protected
- Remote panel available auto frequency
- 10msec typical transfer time optional 25W power save mode
- 7 battery type settings for charger
- 7 Automatic transfer switch
- Continuous Output Power: 4000 Watts
- Surge Rating: 12,000 Watts (20 Seconds)
- Output 120/240 Vac – Split Phase 60hz
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95%
- Output Frequency: 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 10% DC
- Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)
Input Specifications
- Nominal Input Voltage: 12.0Vdc
- Minimum Start Voltage: 10.0Vdc
- Low Battery Alarm: 10.5Vdc-11.0Vdc
- Low battery Trip: 10.0Vdc-10.5Vdc
- High Voltage Alarm: 16.0Vdc Low battery
- Voltage Restart: 15.5Vdc
- Idle Consumption: 50 Watts
- Power Saver Mode Idle Consumption: 21 Watts
Charger Specifications
- Output voltage: Depends on battery Type
- Charger Rate: 115A Over
- Charge Protection Shutdown 15.7V
- Selectable Charge setting based on battery type
- Adjustable charge current off-20%-100%
- Four Stage Smart Charger
- Transfer Switch Specifications 40 amp automatic transfer switch 10 ms (max)
Dimensions
- Unit weight: 75 lb
- Unit size: L x W x H: 31.5 x 8.75 x 7.25 inches
- Shipping weight: 87 lb
- Shipping size: L x W x H: 35.5 x 14.50 x 13.50 inches
- Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75 inches
Description
4000 Watt Pure Sine Inverter Charger 12Vdc / 120Vac Input & 120/240Vac Split Phase Output
This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment.
During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing.
Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant.
- 4000 watt low frequency inverter
- 12,000 watt surge for 20 seconds 300% surge capability
- 120/240 VAC output Split Phase Charges with 120 Vac multi-stage smart charger
- 115 Amp battery priority selector
- Charges lithium LiFePO4, gel, AGM and lead batteries. We recommend checking battery charging specifications for all batteries.
- Direct connect AC terminal block
- Marine coated and protected
- Remote panel available auto frequency
- 10msec typical transfer time optional 25W power save mode
- 7 battery type settings for charger
- 7 Automatic transfer switch
- Continuous Output Power: 4000 Watts
- Surge Rating: 12,000 Watts (20 Seconds)
- Output 120/240 Vac - Split Phase 60hz
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95%
- Output Frequency: 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 10% DC
- Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)
Input Specifications
- Nominal Input Voltage: 12.0Vdc
- Minimum Start Voltage: 10.0Vdc
- Low Battery Alarm: 10.5Vdc-11.0Vdc
- Low battery Trip: 10.0Vdc-10.5Vdc
- High Voltage Alarm: 16.0Vdc Low battery
- Voltage Restart: 15.5Vdc
- Idle Consumption: 50 Watts
- Power Saver Mode Idle Consumption: 21 Watts
Charger Specifications
- Output voltage: Depends on battery Type
- Charger Rate: 115A Over
- Charge Protection Shutdown 15.7V
- Selectable Charge setting based on battery type
- Adjustable charge current off-20%-100%
- Four Stage Smart Charger
- Transfer Switch Specifications 40 amp automatic transfer switch 10 ms (max)
Dimensions
- Unit weight: 75 lb
- Unit size: L x W x H: 31.5 x 8.75 x 7.25 inches
- Shipping weight: 87 lb
- Shipping size: L x W x H: 35.5 x 14.50 x 13.50 inches
- Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75 inches
