Power Generation Accessories LLC
UPS
UPS
Deep Sea Electronics DSEP100 Mains Decoupling Relay
By PGA LLC AdmiN | |
FULLY G99/1 & G98/1 COMPLIANT G99 Type Tested Variant - Now Available (DSEP100-02) The DSEP100 G99/G59 Mains(utility) Protection Relay detects changes in the mains (utility) supply to which the distributed energy resource (DER) is connected. If a mains (utility) failure is detected, the DSEP100 will disconnect the equipment in line with national and international DNO requirements.  This removes the risk of an islanded grid being formed and protects DER equipment. DSEP100 is suitable for use with all DER equipment supplying power in parallel with the mains (utility) supply.  This includes diesel generators and renewable energies such as photovoltaic (solar) and wind turbine installations etc. The DSEP100-02 G99 type tested variant is supplied with pre-configured settings to comply with G99 that cannot be changed by the user. CONNECTING TO THE MAINS (UTILITY) From 27th April 2019 new Grid Codes replaced G59 in GB.  From that date all new distributed energy resources (DERs),  formally falling under G59 must comply with new regulation G99. The DSEP100 Mains Decoupling Relay is compatible with G99. NB. Existing DERs in GB (connected prior to 27th April 2019) need to be aware that G59 has also been amended.  This means that connected equipment, which complied to G59 on installation, may no longer comply. If you have an existing DSEP100 no new equipment is necessary.  Simply change the settings through DSE Configuration Suite PC software. OVERALL SIZE 157 mm x 95 mm x 67 mm (6.2” x 3.5” x 2.6”) PANEL CUTOUT SIZE N/A MAXIMUM PANEL THICKNESS N/A WEIGHT 0.38kg PRODUCT VARIANTS P100-01 - P100 Mains (Utility) Decoupling Relay P100-02 - P100 Mains (Utility) Decoupling Relay (G99 Type Tested)

DC POWER SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. MAXIMUM OPERATING CURRENT 360 mA at 12 V, 170 mA at 24 V

AC POWER SUPPLY

CONTINUOUS VOLTAGE RATING 85 V to 305 V AC (Ph to N) CONTINUOUS FREQUENCY RATING 3.5 Hz to 75 Hz MAXIMUM OPERATING CURRENT 58 mA at 110 V AC (Ph to N) 28 mA at 230 V AC (Ph to N)

MAINS (UTILITY)

VOLTAGE RANGE 15 V to 333 V AC (Ph to N) 26 V to 576 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

OUTPUTS

OUTPUT A, B, C, D & E Volt-Free Change-Over 5 A at 30 V DC 8 A at 250 V AC  
Deep Sea Electronics DSEP100 Mains Decoupling Relay FULLY G99/1 & G98/1 COMPLIANT
By PGA LLC AdmiN | |
FULLY G99/1 & G98/1 COMPLIANT G99 Type Tested Variant - Now Available (DSEP100-02) The DSEP100 G99/G59 Mains(utility) Protection Relay detects changes in the mains (utility) supply to which the distributed energy resource (DER) is connected. If a mains (utility) failure is detected, the DSEP100 will disconnect the equipment in line with national and international DNO requirements.  This removes the risk of an islanded grid being formed and protects DER equipment. DSEP100 is suitable for use with all DER equipment supplying power in parallel with the mains (utility) supply.  This includes diesel generators and renewable energies such as photovoltaic (solar) and wind turbine installations etc. The DSEP100-02 G99 type tested variant is supplied with pre-configured settings to comply with G99 that cannot be changed by the user. CONNECTING TO THE MAINS (UTILITY) From 27th April 2019 new Grid Codes replaced G59 in GB.  From that date all new distributed energy resources (DERs),  formally falling under G59 must comply with new regulation G99. The DSEP100 Mains Decoupling Relay is compatible with G99. NB. Existing DERs in GB (connected prior to 27th April 2019) need to be aware that G59 has also been amended.  This means that connected equipment, which complied to G59 on installation, may no longer comply. If you have an existing DSEP100 no new equipment is necessary.  Simply change the settings through DSE Configuration Suite PC software. OVERALL SIZE 157 mm x 95 mm x 67 mm (6.2” x 3.5” x 2.6”) PANEL CUTOUT SIZE N/A MAXIMUM PANEL THICKNESS N/A WEIGHT 0.38kg PRODUCT VARIANTS P100-01 - P100 Mains (Utility) Decoupling Relay P100-02 - P100 Mains (Utility) Decoupling Relay (G99 Type Tested)

DC POWER SUPPLY

CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. MAXIMUM OPERATING CURRENT 360 mA at 12 V, 170 mA at 24 V

AC POWER SUPPLY

CONTINUOUS VOLTAGE RATING 85 V to 305 V AC (Ph to N) CONTINUOUS FREQUENCY RATING 3.5 Hz to 75 Hz MAXIMUM OPERATING CURRENT 58 mA at 110 V AC (Ph to N) 28 mA at 230 V AC (Ph to N)

MAINS (UTILITY)

VOLTAGE RANGE 15 V to 333 V AC (Ph to N) 26 V to 576 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz

OUTPUTS

OUTPUT A, B, C, D & E Volt-Free Change-Over 5 A at 30 V DC 8 A at 250 V AC  
Deep Sea Electronics DSEP915 pView® Ethernet Plug-in Adapter
By PGA LLC AdmiN | |
The DSEP915 Ethernet Plug-In Adapter is an optional module designed to be connected to the back of a DSE961 or DSE962 to provide remote monitoring of the device.
Deep Sea Electronics DSEP961 pView® Multi-Function Power Meter
By PGA LLC AdmiN | |
The DSEP961 is an 80 V AC to 265 V AC / 110 V DC to 300 V DC intelligent network monitoring power meter that can accept an AC or DC auxiliary supply. It has been designed to provide complete measurement and monitoring functions for power systems. OVERALL SIZE 96mm x 96mm x 62mm CUTOUT 92mm x 92mm WEIGHT 0.3 kg PRODUCT VARIANTS 0961-01 – pView Multi-Function Power Meter  
Deep Sea Electronics DSEP962 pView® Multi-Function Power Meter
By PGA LLC AdmiN | |
The DSEP962 is an 11 V DC to 60 V DC intelligent network monitoring power meter that can accept a DC auxiliary supply. It has been designed to provide complete measurement and monitoring functions for power systems. OVERALL SIZE 96mm x 96mm x 62mm CUTOUT 92mm x 92mm WEIGHT 0.3 kg PRODUCT VARIANTS 0962-01 – pView Multi-Function Power Meter  
GAC ACB120 Actuator Multi-V DC Military-Style Connector
By PGA LLC AdmiN | |

120 Series Universal Actuator, 1.0 lbf·ft Torque

1.0 lbf·ft [1.35 N·m] Net Torque - 25º Rotation - Serrated Shaft and Includes Lever LE1400-2 The 120 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12-, 24-, or 32-volt battery supplies. 120 Series Universal Actuator Multi-V DC - Military-Style Connector without Mating Connector - Sand-Cast Housing
  • Small, low-cost, low-friction model
  • 1.0 lbf·ft [1.35 N·m] of torque
  • Suitable for rotary or small in-line fuel pumps on small carburetors
  • Ideal for fuel systems on engines up to 150 hp [112 kW]
 
GAC ACB2001 24V Lever LE2000 M8 Holes Strip ESD5330 ESD5340
By PGA LLC AdmiN | |

2001 Series Universal Actuator

12.0 lbf·ft [16.3 N·m] Net Torque - 35° Rotation ACB2001 actuator is a rotary output, 24 V, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers requiring torques in the 16.3 N?m range. Energized by GAC’s ESD5300 Series speed control units, the actuator is capable of 35 degrees of rotation with torques as high as 16.3 N?m. Internal springs provide fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. Engine applications include large block pumps, dual-medium carburetors and large-sized carburetors. 24 V DC - Includes Lever LE2000 (M8 Holes) - Terminal Strip [Compatible with ESD5330/5340]
  • Rapid response to transient conditions
  • Multiple mounting positions
  • Uni-directional CW/CCW
  • Internal return spring
  • Maintenance-free
  • Universal design
  • Easy installation
 
GAC ACB225 Actuator 12V 24V Multi MIL Connector
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2 The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. 225 Series Electric Actuator rotary-output, linear-torque, proportional servo Multi-V DC - Military-Style Connector without Mating Connector - Sand-Cast Housing
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ACB275C 275 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

275 Series Bosch P Pump-Mounted Actuator

275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series - Installation Kit KT286 (Gasket and Hardware) Included The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. ACB275C Actuator - 24 V DC - Military-Style Connector without Mating Connector - Specially Designed for MTU - Stop Lever LE1400-4 Included
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Stop lever
  • Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
  • Control up to 12-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACB275H 275 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

275 Series Bosch P Pump-Mounted Actuator

275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series - Installation Kit KT286 (Gasket and Hardware) Included The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. 275 Series Actuator - Multi-V DC - Military-Style Connector without Mating Connector - Stop Lever LE1400-4 Included
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Stop lever
  • Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
  • Control up to 12-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACD110-12 110 Series Deutz 1011 and 1012 Engine Mounted Actuator
By PGA LLC AdmiN | |
The 110 Series Integral Actuator is designed to mount directly to DEUTZ 1011 series 2-, 3- and 4-cylinder engines in place of the electric stop solenoid and is available in 12 and 24 V DC. GAC’s unique linear electromechanical technology provides proportional actuator movement based on actuator coil current. This unique, optimum fuel control, actuating device will outperform externally mounted types of electric actuators. An integral high performance speed control system results when the 110 Series Electric Actuator is installed on the engine and electrically connected to complementing governor system components. No external linkages or brackets are required and no extra DEUTZ parts are needed. 12 V DC • Deutsch Connector without Mating Connector • Same as ACD110A
  • Easy installation
  • High quality construction
  • Optimum fuel control
  • Fast response to transients
  • Outstanding reliability
  • Designed for high temperature applications
  • Ideal for variable and constant speed
 
GAC ACD110-24 110 Series Deutz 1011 and 1012 Engine Mounted Actuator
By PGA LLC AdmiN | |
The 110 Series Integral Actuator is designed to mount directly to DEUTZ 1011 series 2-, 3- and 4-cylinder engines in place of the electric stop solenoid and is available in 12 and 24 V DC. GAC’s unique linear electromechanical technology provides proportional actuator movement based on actuator coil current. This unique, optimum fuel control, actuating device will outperform externally mounted types of electric actuators. An integral high performance speed control system results when the 110 Series Electric Actuator is installed on the engine and electrically connected to complementing governor system components. No external linkages or brackets are required and no extra DEUTZ parts are needed. 24 V DC • Deutsch Connector without Mating Connector • Same as ACD110A
  • Easy installation
  • High quality construction
  • Optimum fuel control
  • Fast response to transients
  • Outstanding reliability
  • Designed for high temperature applications
  • Ideal for variable and constant speed
 
GAC ACD175A 175 Series 12V Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

175 Series Bosch P Pump-Mounted Actuator

175 Series Integrated Pump Mounted Actuator - Various Inline Pumps (Bosch A/P, Zexel, BYC Asimco, MW, RP etc.) • Stop Lever Included The 175 Series Integrated Pump Mounted Actuators are field-proven proportional actuators designed to mount directly to fuel injection Bosch style P pumps to achieve an integrated proportional servo fuel package. Since the design has no sliding parts and its components are sealed, outstanding reliability results with no maintenance required. The design is versatile with numerous options and mounting kits available in order to adapt to other fuel pumps. ACD175A Actuator -  12 V DC - Packard Connector without Mating Connector - Double Rack Bearing - BYC ASIMCO KT283 Included
  • Connects directly to fuel rack in place of mechanical governor
  • Available with digital governors
  • Manual shut-off mechanism
  • Fast response; < 35 ms (10–90 %)
  • Right-hand rack
 
GAC ACD175A 175 Series 24V Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

175 Series Bosch P Pump-Mounted Actuator

175 Series Integrated Pump Mounted Actuator - Various Inline Pumps (Bosch A/P, Zexel, BYC Asimco, MW, RP etc.) • Stop Lever Included The 175 Series Integrated Pump Mounted Actuators are field-proven proportional actuators designed to mount directly to fuel injection Bosch style P pumps to achieve an integrated proportional servo fuel package. Since the design has no sliding parts and its components are sealed, outstanding reliability results with no maintenance required. The design is versatile with numerous options and mounting kits available in order to adapt to other fuel pumps. ACD175A-24 Actuator  - 24 V DC - Packard Connector without Mating Connector - Double Rack Bearing - BYC ASIMCO KT283 Included
  • Connects directly to fuel rack in place of mechanical governor
  • Available with digital governors
  • Manual shut-off mechanism
  • Fast response; < 35 ms (10–90 %)
  • Right-hand rack
 
GAC ACE275H-24 275 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

275 Series Bosch P Pump-Mounted Actuator

275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series - Installation Kit KT286 (Gasket and Hardware) Included The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. ACE275H Actuator -  24 V DC - Packard Connector without Mating Connector - Stop Lever LE1400-4 Included
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Stop lever
  • Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
  • Control up to 12-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACE275HD-24 275 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

275 Series Bosch P Pump-Mounted Actuator

275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series - Installation Kit KT286 (Gasket and Hardware) Included The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. ACE275HD Actuator  - 24 V DC - Packard Connector without Mating Connector - Heavy Duty Bearing Retention - No Stop Lever Included
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Stop lever
  • Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
  • Control up to 12-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACE275J-24 275 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

275 Series Bosch P Pump-Mounted Actuator

275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series - Installation Kit KT286 (Gasket and Hardware) Included The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. 24 V DC - Packard Connector without Mating Connector - Oil Drain Fitting - Designed for Deutz 1015 Engines - Stop Lever LE1400-4 Included
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Stop lever
  • Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
  • Control up to 12-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACE275K 275 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

275 Series Bosch P Pump-Mounted Actuator

275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series - Installation Kit KT286 (Gasket and Hardware) Included The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. 24 V DC - Packard Connector without Mating Connector - Heavy Duty Bearing Retention - Position Feedback Sensor - Stop Lever LE1400-4 Included
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Stop lever
  • Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
  • Control up to 12-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACE295-24 295 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |

295 Series Bosch P Pump-Mounted Actuator

BOSCH P9000–10000 STYLE The 295 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 9 and 10 fuel-injected pumps. Coupling the 295 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 295 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available. ACE295 Actuator  - 24 V DC - Packard Connector without Mating Connector - Includes KT295 Installation Kit
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Mounts directly on Bosch P 9 and 10 injection pumps in place of mechanical governor
  • Control up to 16-cylinder pumps
  • Adjustable maximum fuel limit
 
GAC ACE295F-24 295 Series Bosch P Pump-Mounted Actuator
By PGA LLC AdmiN | |
ACE295F Pump Mounted Actuator with Position Feedback Sensor (AB)
  • 24 V DC
  • Mounts directly on Bosch P 9 and 10 injection pumps in place of mechanical governor
  • Position Feedback Sensor (AB)
  • Control up to 16-cylinder pumps
  • Optimum performance for in-line pumps
  • Includes manual rack return mechanism
  • Adjustable maximum fuel limit
  • Includes Packard Connector without Mating Connector and KT295 Installation Kit
GAC ADB120 Actuator Multi-VDC Military Style Connector
By PGA LLC AdmiN | |

120 Series Universal Actuator, 1.0 lbf·ft Torque

1.0 lbf·ft [1.35 N·m] Net Torque - 25º Rotation - Serrated Shaft and Includes Lever LE1400-2 The 120 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12-, 24-, or 32-volt battery supplies. 120 Series Universal Actuator Multi-V DC - Military-Style Connector without Mating Connector - Die-Cast Housing
  • Small, low-cost, low-friction model
  • 1.0 lbf·ft [1.35 N·m] of torque
  • Suitable for rotary or small in-line fuel pumps on small carburetors
  • Ideal for fuel systems on engines up to 150 hp [112 kW]
 
GAC ADB120E4 Actuator Series Multi Voltage MIL Cummins
By PGA LLC AdmiN | |

120 Series Universal Actuator, 1.0 lbf·ft Torque

1.0 lbf·ft [1.35 N·m] Net Torque - 25º Rotation - Serrated Shaft and Includes Lever LE1400-2 The 120 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12-, 24-, or 32-volt battery supplies.

120 Series Universal Actuator

Multi-VDC - Military-Style Connector without Mating Connector - Includes Fuel Metering Valve KT6723 and Check Valve VA410063

  • Easy installation
  • Maintenance-free
  • Proven reliability
  • Compact size
  • Precise engine speed control
  • Enhances engine performance
  • Rapid response to transient conditions
  • Available with or without stop lever
   
GAC ADB225 Actuator 12V 24V Multi MIL Connector
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2 The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. 225 Series Electric Actuator rotary-output, linear-torque, proportional servo Multi-V DC - Military-Style Connector without Mating Connector - Die-Cast Housing
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADB335 Actuator Series 24V Military-Style Connector
By PGA LLC AdmiN | |

335 Series Universal Actuator, 3.3 lbf·ft Torque

3.3 lbf·ft [4.5 N·m] Net Torque - 65° Rotation • Singe-Sided Shaft The 335 series is a universal actuator with fast response, low current draw, and precision bearings. 24 V DC - Military-Style Connector without Mating Connector [Compatible with ESD5330/5340]
  • Rapid response to transient conditions
  • Internal return spring
 
GAC ADB335F Actuator Series 24V Military-Style Connector
By PGA LLC AdmiN | |

335 Series Universal Actuator, 3.3 lbf·ft Torque

3.3 lbf·ft [4.5 N·m] Net Torque - 65° Rotation • Singe-Sided Shaft The 335 series is a universal actuator with fast response, low current draw, and precision bearings. 24 V DC - Military-Style Connector without Mating Connector - Position Feedback Sensor (Novotechnik) [Compatible with ESD5330/5340]
  • Rapid response to transient conditions
  • Internal return spring
 
GAC ADC100 100 Series 12V Stanadyne Pump-Mounted Actuator
By PGA LLC AdmiN | |

100 Series Stanadyne Pump-Mounted Actuator

100 Series STANADYNE D SERIES (DB, JDB, DC, DB2, DB4, DM2, DM4) The 100 Series is designed to mount directly to Stanadyne D Series fuel injection pumps. When the ADC100 electric actuator is installed on the fuel pump, an integral high-performance fuel control system results. No external linkages or brackets are required and no extra Stanadyne parts are needed. In addition, when the governor system is de-energized, the ADC100 series provides the function of a fuel shutoff solenoid. 12 V DC - Packard Connector without Mating Connector - Includes GA102
  • Mounts directly to Stanadyne D Series pump
  • No external linkages or brackets required
  • Functions as a fuel shutoff solenoid when governor system is de-energized
  • Faster response than competitive design
 
GAC ADC100 100 Series 24V Stanadyne Pump-Mounted Actuator
By PGA LLC AdmiN | |

100 Series Stanadyne Pump-Mounted Actuator

100 Series STANADYNE D SERIES (DB, JDB, DC, DB2, DB4, DM2, DM4) The 100 Series is designed to mount directly to Stanadyne D Series fuel injection pumps. When the ADC100 electric actuator is installed on the fuel pump, an integral high-performance fuel control system results. No external linkages or brackets are required and no extra Stanadyne parts are needed. In addition, when the governor system is de-energized, the ADC100 series provides the function of a fuel shutoff solenoid. 24 V DC - Packard Connector without Mating Connector - Includes GA102
  • Mounts directly to Stanadyne D Series pump
  • No external linkages or brackets required
  • Functions as a fuel shutoff solenoid when governor system is de-energized
  • Faster response than competitive design
 
GAC ADC120S Actuator Series 12V Commercial
By PGA LLC AdmiN | |

120 Series Universal Actuator, 1.0 lbf·ft Torque

1.0 lbf·ft [1.35 N·m] Net Torque - 25º Rotation - Serrated Shaft and Includes Lever LE1400-2 The 120 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12-, 24-, or 32-volt battery supplies. 120 Series Universal Actuator 12 V DC - Commercial Connector with Mating Harness CH251-2134
  • Small, low-cost, low-friction model
  • Internal spring provides fail-safe operation
  • 1.0 lbf·ft [1.35 N·m] of torque
  • Suitable for rotary or small in-line fuel pumps on small carburetors
  • Ideal for fuel systems on engines up to 150 hp [112 kW]
 
GAC ADC120S Actuator Series 24V Commercial
By PGA LLC AdmiN | |

120 Series Universal Actuator, 1.0 lbf·ft Torque

1.0 lbf·ft [1.35 N·m] Net Torque - 25º Rotation - Serrated Shaft and Includes Lever LE1400-2 The 120 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12-, 24-, or 32-volt battery supplies. 120 Series Universal Actuator 24 V DC - Commercial Connector with Mating Harness CH251-2134
  • Small, low-cost, low-friction model
  • Internal spring provides fail-safe operation
  • 1.0 lbf·ft [1.35 N·m] of torque
  • Suitable for rotary or small in-line fuel pumps on small carburetors
  • Ideal for fuel systems on engines up to 150 hp [112 kW]
 
GAC ADC225GAS Actuator 12V Commercial Lesser 26d
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2 The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. 225 Series Electric Actuator 12 V DC - Commercial Connector with Mating Harness CH251-2134 - Lesser Rate Return Spring SP203 - Thin Rubber Stop 26° Travel
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225GAS Actuator 24V Commercial Lesser 26d
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2 The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. 225 Series Electric Actuator 24 V DC - Commercial Connector with Mating Harness CH251-2134 - Lesser Rate Return Spring SP203 - Thin Rubber Stop 26° Travel
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225GS Actuator 12V Serrated Return Spring
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. Rotary output, linear torque, proportional servo 12 V DC - Commercial Connector with Mating Harness CH251-2134 - Lesser Rate Return Spring SP203
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225GS Actuator 24V Serrated Return Spring
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. Rotary output, linear torque, proportional servo 24 V DC - Commercial Connector with Mating Harness CH251-2134 - Lesser Rate Return Spring SP203
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225JS Actuator 12V Serrated Return Spring
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.
225 Series Electric Actuator 12 V DC - Commercial Connector with Mating Harness CH251-2134 - Greater Rate Return Spring SP207
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225JS Actuator 24V Serrated Return Spring
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.
225 Series Electric Actuator 24 V DC - Commercial Connector with Mating Harness CH251-2134 - Greater Rate Return Spring SP207
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225KS Actuator 24V Serrated Shaft High Temp
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.
225 Series Electric Actuator 24 V DC - Commercial Connector with Mating Harness CH251-2134 - High Temperature Coil for Full Duty Cycle Operation - Contact GAC for Renault 5010438374, which has Saab Connector
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225S Actuator 12V Commercial Serrated Shaft
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.
225 Series Electric Actuator 12 V DC - Commercial Connector with Mating Harness CH251-2134
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADC225S Actuator 24V Commercial Serrated Shaft
By PGA LLC AdmiN | |

225 Series Universal Actuator, 2.2 lbf·ft Torque

2.2 lbf·ft [3.0 N·m] Net Torque - 25° Rotation - Serrated Shaft and Includes Lever LE1400-2The 225 Series Electric Actuator is a rotary-output, linear-torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shutoff position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12- and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units. Thus, it provides more stable and rapid response to transient conditions. Applications include fuel injection pumps (with or without mechanical governors), rotary-type pumps, and medium-sized gaseous-fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.
225 Series Electric Actuator 24 V DC - Commercial Connector with Mating Harness CH251-2134
  • Easy installation
  • Universal design
  • Internal return spring
  • Rapid response to transient
  • Multiple mounting positions
  • 2.2 lbf·ft [3.0 N·m] torque
  • 25º rotation
 
GAC ADD103B 103 Series 12 Volt Delphi Pump-Mounted Actuator
By PGA LLC AdmiN | |
Light-Force actuators are low-current, fast-responding, small actuators that include GACs 100, 103, 104, ALR, and T1/T2 ATB Series. They offer a fast response, precise governing and are a low-cost, economical solution. Light Force Governing provides finer adjustment resolution for smaller actuators. It is designed to work with low current small actuators, like T1 ATB, ALR/ALN, 100/103/104 series and normally closed Cummins EFC actuators.  Select the Light Force Governing on your GAC speed controller when using small actuators to improve adjustments as they respond very quickly to input changes over a smaller range of operating current, using a fraction of the PID and current output of a normal actuator. 12VDC - Packard Connector with Mating Connector Kit EC1300 - With Installation Kit KT292 (O-Ring, Bolts)
  • Mounts directly to Delphi DPG/DP210 Pump
  • No external linkages or brackets required
  • Fast response; < 45 ms
  • Functions as a fuel shutoff solenoid when governor system is de-energized
 
GAC ADD103B 103 Series 24 Volt Delphi Pump-Mounted Actuator
By PGA LLC AdmiN | |
Light-Force actuators are low-current, fast-responding, small actuators that include GACs 100, 103, 104, ALR, and T1/T2 ATB Series. They offer a fast response, precise governing and are a low-cost, economical solution. Light Force Governing provides finer adjustment resolution for smaller actuators. It is designed to work with low current small actuators, like T1 ATB, ALR/ALN, 100/103/104 series and normally closed Cummins EFC actuators.  Select the Light Force Governing on your GAC speed controller when using small actuators to improve adjustments as they respond very quickly to input changes over a smaller range of operating current, using a fraction of the PID and current output of a normal actuator. 24VDC - Packard Connector with Mating Connector Kit EC1300 - With Installation Kit KT292 (O-Ring, Bolts)
  • Mounts directly to Delphi DPG/DP210 Pump
  • No external linkages or brackets required
  • Fast response; < 45 ms
  • Functions as a fuel shutoff solenoid when governor system is de-energized
 
1 … 4 5 6 7 8 … 20