Hybrid Analog/Digital, Voltage Regulator Compatible with Stamford AS440* & AS465-2* Not a genuine Newage product.

• Voltage Regulation < ±1%
• Can Be Use In Parallel Operation
• Adjustable DIP, TRIM & DROOP Function
• Under Frequency Roll Off Protection
• Sensing Voltage Loss Protection
• Under Frequency LED Indicator
• Soft Start Voltage Ramping

 

UL-1236 listed Intelligent switch mode battery charger Automatic charging under all conditions Elevated ambient temperature will automatically reduce output power Low battery voltage monitor with solid state battery negative alarm output Charging current and voltage display Short circuit & reverse polarity protections No current drain when input power is off Built-in AC power input micro fuse protection Panel Mount or DIN Rail

UL-1236 listed Intelligent switch mode battery charger Automatic charging under all conditions Elevated ambient temperature will automatically reduce output power Low battery voltage monitor with solid state battery negative alarm output Charging current and voltage display Short circuit & reverse polarity protections No current drain when input power is off Built-in AC power input micro fuse protection Panel Mount or DIN Rail

The DSP-10 Genset Multi-Function Display Module is an universal compact integrated digital displayer. It can be installed solely or joint with GCU-10.

Features:

• First and only Multi-function Display Module specially designed for generator set
• Three sets four Digits High illumination LED Suitable for Outdoor use
• Microprocessor Based Design
• Full Phase AC Voltage RMS value Display
• Full Phase with Load RMS value Display
• AC Input Frequency Display
• DC Supply Voltage Display
• Engine Operating Time Display
• All values can be programmed according to user’s actual demand to be cyclic displayed
• Compact, Anti-shock, Easy installation
• DIN rail terminal for easy connection
• Four adjustable Voltage and Current Push Buttons
• Five Dip Switches For Specification Setting

 

Replacement for Leroy Somer EA230 McPherson Controls Self Excited Automatic Voltage Regulator Not a genuine Leroy Somer product. Features

• Voltage Regulation < ±1%
• Economical Compact Design
• For use in 50/60 Hz Brushless Generators
• EMI Suppression
• Under Frequency Protection
• Over Excitation Current Shutdown
• 120 VAC Optional

 

Replacement for Mecc Alte UVR-6/SR-7 McPherson Controls Automatic Voltage Regulator Not a genuine Mecc Alte part Features:

• Voltage Regulation < ±1%
• Sensing Input 220~480 VAC for Single Phase Sensing & Three Phase Sensing
• Rated Frequency 50/60 Hz
• Power Input 50~280 VAC
• Low Frequency & Over Excitation Protection
• EMI Suppression

 

McPherson Controls Automatic Flashing Unit for brush Type Generators The Safe and Easy Way to Automatically Flash any Stubborn Old Generators The EB-9V Automatic Flashing Module is a true electronic flashing circuit with a larching timeout circuit that can be set from 1 to 8 seconds timer. This unit will not flash again as the generator is turned off. When true residual voltage is too low for the voltage regulator to build voltage normally on the generator the EB-9V is what you need.

• No external battery or DC power supply required, excitation power provided by an internal battery.
• Small size, light weight, easy installation, saving labor.
• Automatic excitation detection requires no manual operation or settings.
• Very low static power consumption, Up to 3 years between battery replacement in standby mode.
• Excitation function repeats 3 times and stops automatically when voltage is established.
• Battery low voltage alarm reminds user to change battery.
• Excitation failure warning, Resets automatically with voltage buildup or when engine stopped.
• Battery reverse polarity protection.
• Excitation field F+, F- Reverse Polarity Protection.
• Manual Forced Excitation Function.

The ECU-04 and ECU-05 24 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.

Features:

• Microprocessor Automatically Mimics The Manual Start Procedure
• Simple Installation, Without Changing Original Wiring
• Easy to Set Up, low-cost, Small Size, Low Power Consumption
• For Use In Gasoline And Diesel Generators
• Three Attempts Multi-Start Function
• Circuits Are Protected With 94-V0 Epoxy
• Two Adjustable Time Delay Potentiometers

 

The ECU-04 and ECU-05 24 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.

Features:

• Microprocessor Automatically Mimics The Manual Start Procedure
• Simple Installation, Without Changing Original Wiring
• Easy to Set Up, low-cost, Small Size, Low Power Consumption
• For Use In Gasoline And Diesel Generators
• Three Attempts Multi-Start Function
• Circuits Are Protected With 94-V0 Epoxy
• Two Adjustable Time Delay Potentiometers

 

Replacement for Denyo ND-30and ND35 (280SS generator) Welder Generator Accessory  

Universal Electronic Engine Governor Controller

The EG3000 Universal Generator Electronic Governor Controller is equipped with Smoke Limiting, & Idle Speed. It’s suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps. Used worldwide as a Compatible Replacement for the following models:

Cummins: 3062322 – 3419988 – 3098693 – 3044196 – 4913988-BI.

Barber Colman: DYN1 10794-000-0-24 – DYN1-10654-000-0-24 – DYN1-1065X Series – DYN1-1069X Series – DYN1-10754-000-0-12 – DYN1-10754-001-0-24 – DYN1-10704-000-0-12 – DYN1-10704-000-0-24 – DYN1-10754-004-0-24.

GAC: ESD2210-12 – ESD5111 – ESD5221 – ESD5500 – ESD5500E – ESD5500E K77255 – ESD5550 – ESC63C.

Woodward: 8290-038 – 8290-147 – 8290-185 – 8290-190 – DPG2101-000-012 – DPG-2104 – DPG-2201-002 – 8290-184 – 8270-1033 (12V) – EPG P/N 8290-189

Features:

• Works on a wide ranges of MPU/flywheel frequencies
• 15 Amp Max Output
• Suitable for all types of diesel and Gas engines
• High Sensitivity and stable at Low Frequency Variations
• Moisture, vibration, and rust protected, Epoxy encapsulated electronics
• For Use With Isochronous Generators & Automatic Paralleling PLC controls
• Idle Speed Adjustment and connections for a Remote Speed POT

 

Simple to install and setup Digital Engine Governor for use in Gas and Diesel Generators with smoke and idle controls working off the generator frequency, (no MPU needed) With installation feedback help and compatibility with all types of actuators and PT Pumps. The EG4015 Governor uses generator frequency to control engine speed. It works without a magnetic pickup (MPU), a digital circuit detects the reference frequency from the generators output. Digital governors are not influenced by frequency drift caused by temperature. This control uses advanced PID Algorithms, together with GAIN and DIF pots to simplify adjustments and governor response. The EG4015 can be used in all types of engine actuators that work with less then 15Amps and Cummins PT PUMP. LED’s give feedback to determine perational and fault conditions making it easy to install and calibrate.  

Universal Droo Module (Reactive Factor Compose Module) for paralleling McPherson AVR MTS63-4A/B, SS053, SS460, SS63-2.5, and SS63-2.5C

Description

• Single Phase Reactive Factor Compose 50/60 Hz
• Low Power Dissipation Max. 1VA
• Suitable to Two C.T
• Resin Encapsulation Modularity Without Other Installation
• Applicable to Variety AVR

 

Electronic over Voltage Monitor Universal Over Voltage Protection adjustable range 210 VAC to 290 VAC/ 400 VAC TO 560 VAC Features

• Power & Over Voltage LED Indicators
• Reset Button / Offer Outer Reset Terminal
• Voltage Monitor & Time Delay Set
• Dry Contact Output
• Operation Voltage 10~28 VDC
• Two-Stage Voltage Range Monitored

 

The GCU-10/DSP-10 Generator Control Units are universal economical programmable genset controllers. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-11R (12V/24V) helps to simplify the wiring and connection process. Feature: GCU-10

• Microprocessor Based Design
• Universal LED Graphic Interface, Displays Generator Status and Failures
• Modular Design, Quick Installation
• Programmable Engine & Generator Controls Adapts Easily To Any Type Generator Set.
• Waterproof Front Panel With UV Protection
• Provide IDLE control For Elec. Governors
• Five Adjustable Time Delay Potentiometers
• Five DIP Switches For Specification Setting

DSP-10

• First and only Multi-function Display Module specially designed for generator set
• Three sets four Digits High illumination LED Suitable for Outdoor use
• Microprocessor Based Design
• Full Phase AC Voltage RMS value Display
• Full Phase with Load RMS value Display
• AC Input Frequency Display
• DC Supply Voltage Display
• Engine Operating Time Display
• All values can be programmed according to user’s actual demand to be cyclic displayed
• Compact, Anti-shock, Easy installation
• DIN rail terminal for easy connection
• Four adjustable Voltage and Current Push Buttons
• Five Dip Switches For Specification Setting

 

The GCU-10 Generator Control Unit is an universal economical programmable genset controller. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-11R (12V/24V) helps to simplify the wiring and connection process. Feature:

GCU-100 Generator Automatic Control and Protection Module is suitable for most generators available on the market, it is equipped with graphical warning signals and 3 sets of 4 digits LED display to display the real time 3 phase voltage, current, frequency, battery volt, running hours and setting values.

Features:

• Micro-Processor Auto Control & Protection
• Three Sets of High Illuminating LED Display Suitable for Indoor and Outdoor Use
• Full Function Modularized Design for Easy Installation
• All Functions Setting Can Be Done Directly On GCU-100 No Need For PC Connection^*
• All settings are recorded into the internal (EEPROM) and protected from erasure even without battery
• Easy to Understand Graphical Warning Signals
• Din Rail Terminal For Easy Installation
• IP65 Waterproof Front Panel

*User can Program, Change and Cancel Protection and Warning Settings according to the requirement

 

GCU-20 Automatic Engine & Generator Control Unit has many useful functions like annunciator alarm output and selectable EM81/EM121 MPU signal for speed sensing. It’s suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.

Features:

• Microprocessor Based Design
• Universal LED Graphic Interface, Displays Generator Status and Failures
• Modular Design, Quick Installation
• With Annunciator Alarm Output
• Selectable MPU Signal for Speed Sensing
• Suitable for Pump Engine control
• With Lamp Test Function for All Front Panel LEDs and Annunciator Lamps
• Provide IDLE control For Elec. Governors
• Five Adjustable Time Delay Potentiometers
• Six DIP Switches For Setting Different Engine Parameters

 

The main advantages of using the GCU-3000:

•  Integrated design including an emergency stop button, AVR control, fuses, and positive outputs
• Large easy to see LCD screen
• Programmable start cycles

• Programmable idle speed timer
• Programmable cool down timer
• Maintenance notifications
• Engine block heater control
• Digital temperature sensor included
• High precision oil pressure sensor included
• Full monitoring and protection

LCD information includes the following :

• Full phase AC voltage monitoring
• Full phase AC line voltage monitoring
• Full phase load current monitoring
• KVA output
• Frequency
• Hour Meter
• Battery voltage Indicator
• Oil pressure readings in Psi or Bar
• Temperature in C or F
• Universal Failure Warning icons

 

The IVT-1270 is used to boost motor starting capacity in shunt generators. It achieves boosting power by converting DC battery power to an AC source for use by the AVR. This independent power behaves in the same way as a PMG, augmenting the generator’s ability to handle a larger motor starting current, thereby exceeding its normal motor starting capabilities. It is easy to install, allowing the unit to be integrated to the generator excitation systems quickly. Suitable for any AVR with AUX. power inputs , Applicable AVR Models;McPherson  SS448, ADVR-12, ADVR-2200M, ADVR-250, SS63-12, ADVR-16, ADVR-083. IVT comes with ADVR-083!!!  

The IVT-2470 is used to boost motor starting capacity in shunt generators. It achieves boosting power by converting DC battery power to an AC source for use by the AVR. This independent power behaves in the same way as a PMG, augmenting the generator’s ability to handle a larger motor starting current, thereby exceeding its normal motor starting capabilities. It is easy to install, allowing the unit to be integrated to the generator excitation systems quickly. Suitable for any AVR with AUX. power inputs , Applicable AVR Models: McPherson  SS448, ADVR-12, ADVR-2200M, ADVR-250, SS63-12, ADVR-16, ADVR-083. IVT comes with ADVR-083!!!    

Replacement for Basler Models VR63-4 & VR63-4A Regulator  Mcpherson Controls Self Excited Automatic Voltage Regulator 64 VDC 4Amp Not a genuine Basler product. Features

• Voltage Regulation < ±1%
• For Use In 50/60 Hz Brushless Generators
• Optional 120/240 VAC Sensing Voltage Switch
• Under Frequency & Over Excitation Protection
• EMI Suppression
• Built-in High Breaking Capacity Fuse

 

RA-20 is a remote annunciator module for GCU-20 or other genset controller. With universal LED graphic interface, RA-20 can display generator status and failures. Its main function is to simplify all wiring with pluggable terminal block. RA-20 works up to 1500 Meters from the host module using 18 AWG Cable.

Features:

• Works Up to 1500 Meters from The Host Module Using 18 AWG Cable (@12/24 VDC)
• Universal LED Graphic Interface, Displays Generator Status and Failures
• Modular Design, Quick Installation
• Circuits are Finger Safe with UL94-V0 Epoxy Protection
• Simplify All Wiring with Pluggable Terminal Block
• Easy Assembly & Maintenance with No Chance of Wiring Mistakes

 

Replacement for Kohler infrared photo coupler C-255370 McPherson Controls Self excited AVR Not a genuine Kohler part

Description

• Voltage Regulation < ±1%
• Drive Infrared LED to Control Excitation
• 50/60 Hz Optional
• Under Frequency Protection
• Adjustable Stability
• External Voltage Trimmer Applicable

 

Replacement AVR for Mecc Alte SR7 6 Amps AVR for Single or Three Phase Self Excited Brushless Generator

Description

• Wide Sensing Voltage Range 80~350 VAC for Single Phase Sensing
• Wide Power Input Range 80~270 VAC, Accepts Power Input from Main Winding or Auxiliary Winding
• Under Frequency Protection Indication LED
• Over Excitation Protection and Indication LED
• EMI Suppression

 

Replacement for Onan VR21, Caterpillar VR6, and Yanmar EDY 5000T

McPherson Controls Self Excited Automatic Voltage Regulator

5 Amp Universal AVR for Full Wave Generators

Not a genuine Onan, Caterpillar, and Yanmar products.

• Voltage Regulation < ±1%
• 220 VAC Full Wave Rectifier
• Max. Output Voltage >170 VDC
• Under Frequency Protection
• Soft Start Voltage Ramping
• Under Frequency Protection
• Built-in High Breaking Capacity Fuse

 

McPherson Controls Full Wave 150 Amp Static Analog Voltage Regulator is capable of working in Parallel. Works with A1+A2 Power Factor Correction. Multiple Sensing Voltages. Built In Flashing Unit. The Regulator is built inside a wall-mount enclosure with Cooling System and separate Power Input Sensing. Works with Electric Motor Division (EMD), large CatepillarÂ’s, and large DELL Generators.  

The SS16A3P and SS16A-2 have been discontinued.  McPherson Controls recommended replacement is the ADVR-16. Universal 16 Amp 1/2 Wave Self Excited Automatic Voltage Regulator can be used in parallel operation. Compatible with Mecc Alte* UVR6, Marelli Motori* M40FA640A-MARK I and Caterpillar* AVR Marelli M40FA640A – M16FA650A – M16FA655A – M25FA600A – M16FA600A – M25SA600A – Basler BECS200 – KR4FFX – KR4 – KR7 – AEC63-7 – Caterpillar 3516B – VR65 – VR6 – 85Z 11892 – 3406 – VR3

• Voltage regulation < +/- 0.5%
• Can be used in parallel operation
• 16 Adc current output
• Suitable frequency 50 / 60 Hz
• Inverse-time over excitation protection
• O/E over excitation protection
• Under frequency protection & soft start voltage ramping
• Load CT current compensation, analogue voltage input
• Dimensions: 7″ × 5″ × 2.5″

 

The SS300 voltage regulator is an encapsulated electronic voltage regulator which controls the output of a brushless AC generator by regulating the current into the exciter field. Direct Replacement for the Marathon PM300.  

Replacement for Newage MX321 and Onan 305-0823 McPherson Controls Self Excited Automatic Voltage Regulator 3 Phase Sensing Permanent Magnet Generator type AVR Not a genuine Newage or Onan product Features

• Voltage Regulation < ±0.5% RMS
• For Use In Parallel Operation
• RAMP, DIP, DWELL, DROOP, RMS, U/F, Over Voltage & Over Excitation Adjustment Functions
• Over Exc. / Over Volt. & UFRO LED Indicators
• Current Limiting Function

 

Replacement for Newage MX341 McPherson Controls Self Excited Automatic Voltage Regulator Permanent Magnet Generator (PMG) AVR Not a genuine Newage product

Description

• Voltage Regulation < ±1%
• 3 Phase PMG Power Input
• For Use In Parallel Operation
• Adjustable EXC TRIP, DIP, TRIM & DROOP Functions
• Soft Start Voltage Ramping
• Under Frequency Roll Off Protection
• UFRO & Over Excitation LED Indicators

 

Replacement for Marathon SE350 McPherson Controls Self Excited Brushless Type Generator Automatic Voltage Regulator Not a genuine Marathon product.

Description

• Voltage Regulation < ±1% (with 4% engine governing)
• Optional 120/240 VAC Sensing Input Switch
• 50/60 Hz, Jumper Selectable
• Under Frequency Protection
• Built-in High Breaking Capacity Fuse
• EMI Suppression

 

Replacement for Basler AEC 42-7 McPherson Controls Self Excited Brushless Type Genset Voltage Regulator 42 VDC 7 Amp For Generator with Separate Power Winding+

Description

• Voltage Regulation < ±1%
• Over Excitation Automatic Shut Down
• For Use In Parallel Operation
• EMI Suppression
• Under Frequency Protection
• Soft Start Voltage Ramping

 

Replacement for Newage SX440. McPherson Controls Self Excited Automatica Voltage Regulator Not a genuine Newage product. Features

• Voltage Regulation < ±1%
• Can Be Use In Parallel Operation
• Adjustable DIP, TRIM & DROOP Function
• Under Frequency Roll Off Protection
• Sensing Voltage Loss Protection
• Under Frequency LED Indicator
• Soft Start Voltage Ramping

 

Replacement for Leroy Somer R448, R449, R438, and AEM110RE016 and also Olympian FG Wilson 922 124 McPherson Controls 160 VDC 10Amp AVR for Permanent Magnet Generator (PMG) or A.R.E.P or Auxiliary Winding type generator Not a genuine Leroy Somer, AEM110RE016 and Olympian FG Wilson products.

• Voltage Regulation < ±0.5%
• Load Acceptance Module (LAM)
• 50/60 Hz Selectable
• Under Frequency & Exc. Max Protection
• Single Phase Or Three Phase Voltage Sensing Optional
• Soft Start Voltage Ramping
• Normal Rapid Response Time (Option)

 

Replacement for Stamford Newage SX460 McPherson Controls Self Excited Automatic Voltage Regulator Not a genuine Newage product Features

• Voltage Regulation < ±1.5% (with 4% engine governing)
• Soft Start Voltage Ramping
• Sensing Voltage Loss Protection
• 120 or 240 VAC Sensing, Jumper Selectable
• Under Frequency Roll Off Protection
• With Under Frequency LED Indicator

 

Replacement for Carbon Brush Type Generators McPherson Controls 50 Amp Fullwave Static Regulator Features

• Voltage Regulation < ±1%
• 50/60 Hz Selective
• Adjustable Voltage, Stability & Field Limit

 

McPherson Controls 50 Amp halfwave Static Regulator Replacement for Carbon Bruch Type Generators Features

• Voltage Regulation < ±1%
• 50/60 Hz Selective
• Half Wave
• Adjustable Voltage, Stability & Field Limit

 

Replacement AVR for ELEMAX, HONDA, KAWSAKI, KUBOTA LOW BOY, SUZUKI, SAWAFUJI, YAMAHA generators Self Excited Slip Ring Type AVR with closed-loop feedback circuit Designed For Small Diesel and Gasoline Generators

KUBOTA	GL6500S
YAMAHA	EDL6500S
HONDA	EP3800 , EP5000 , EC6500
KAWASAKI	GE4300A , GE500AS , PP4000 , PP6000
SUZUKI	LTZ400
SAWAFUJI	SH4600EX , SH5300EX , SH6500EXS , SH7600EX
ELEMAX	SH4000 , SH5000 , SH6000 , SH7000

Features

• Voltage Regulation < ±1%
• Full Wave Rectifier
• Single Phase Voltage Sensing
• Epoxy Encapsulated to Isolate Humidity and increase Vibration Proof
• Adjustable Output Voltage
• Light Weight, Durable and Economical

 

Replacement for Basler AVC63-2.5 McPherson Controls Self Excited Automatic Voltage Regulator Not genuine Basler model Features

• Voltage Regulation < ±1%
• Economical Compact Design
• For use in 50/60 Hz Brushless Generators
• EMI Suppression
• Under Frequency Protection
• 120/240 VAC Optional
• Built-in High Breaking Capacity Fuse